Push-Lock fittings are designed for use with 1x19 L.H. lay strand only. They can be used with any tensioning device on the other end but when used with our swageless tensioners, both ends can be put on the cable by hand without any swaging or special tools.

You can order your cables with a tensioner already on one end or you can install a tensioner on one end on site. Attach the tensioner on one end post then cut the cable to length. Slip the Push-Lock fitting into the other end post or, using the style with a threaded eye, mount it to a tab on the outside of the post. Push the cable into the Push-Lock fitting, tension the cable, and your done!

PUSH-LOCK STOP-END FITTINGS

The PL-4 and PL-6 Push-Lock fittings (with rounded heads) are used on level runs. They rest in a hole in the end post. When used with an end post 1-1/2 or more in thickness, the Push-Lock fitting with a rounded head is hidden inside the end post, with only the head exposed on the outside of the post. Pipe ends are counter bored, so the full perimeter of the head will rest on a flat surface in the pipe.

For wood applications, also order 7-16SAE washer.